Email Us

Road Washing Truck

Manten Brand road washing truck is also called high-pressure cleaning vehicle, also known as the high-pressure washing vehicle, has multi-functional washing operation capabilities, and is mainly used for the rapid washing and cleaning of urban sidewalks and auxiliary roads, as well as the cleaning of small advertisements in the city, the washing of fruit peel boxes, trash cans, and the removal of ground dirt. It can work together with small sweepers to quickly clean sidewalks and auxiliary roads, and the work efficiency is higher. The vehicle is small in size, strong in passing, and will not cause damage to other public facilities such as sidewalk floor tiles and manhole covers.

Different Types Of Road Washing Truck

Specification Of Road Washing Truck

SPECIFICATION
Truck Specification
Product NameRoad Washing Truck
Truck ManufacturerMANTEN GROUP
Chassis Specification
Chassis brandDongfeng , Foton, Sinotruk Howo, ISUZU, FAW ,NORTH BENZ, JAC, CAMC ,
Drive type4X2 ,6X4,8X4, 4X4, 6X6,8X8
Engine brandCummins, ISUZU ,Wechai, Yuchai, Yunnei
Transmission brandFast ,ZF  , Manual/ ATM
Tire brandTri-angle, Double Coin, Good year ,Michelin
Upper parts of road cleaning truck
Auxiliary engine and Transmission systemAuxiliary engineModelJX493ZG3
Rated power64kw/4042/r/min
Working speed1500~1700 r/min
Electromagnetic clutchDLK1-25
CouplingTGLA9
High pressure system for waterWater pressure pumpTypePlunger
ModelGTM
Pressure10MPa
Speed800(900)r/min
Water valveModelAir control high pressure ball valve
Pressure10MPa
High pressure Sprinkler nozzleModelHigh pressure washing type
Corner nozzleModelHigh pressure washing type
Spray nozzleModelFine atomization type
Water FilterModelFilter type
Low pressure water systemLow pressure water pumpTypeTwo-stage impeller centrifugal type
Model80QZB(F)-60/90
lifting height90m
Speed1480r/min
Water valveAir control ball valve
Hydraulic systemTypeOpen type, electro-hydraulic control
Main componentsGear pumps, hydraulic cylinders, solenoid valves
Maximum system pressure16MPa
Hydraulic oil tank capacity65L
Electrical SystemTypeUnidirectional DC 24V (chassis) and unidirectional DC 12V (auxiliary generator), negative ground
Battery6-QW-100MF (chassis), 75D31R (secondary engine)


Road Washing Truck Manufacturers & Suppliers

1. The principle of the high-pressure cleaning car is to turn the steel wire with camber elasticity into the blocked sewer pipe by rotating, and take out the clogged cloth strips, hair and the like. There is also a tool called Yibaotong, which is a kind of air pressure dredging tool, which uses the principle of high pressure to flush out blocked sewer pipes. This is the principle of the leather kicker commonly used in life to kick open the blocked pipes. The dredging machine used for industrial pipeline dredging varies greatly due to the size of the pipeline. Pipes below 100MM are dredged as well as household sewer dredging.

2. A water tanker equipped with a high-pressure water pump to clean the sediments in the urban sewers and dredge the sewers. It can also be used for cleaning industrial drainage pipes, walls, etc., and can also be used for sprinkler, water transport and road flushing, and can be used for fire fighting in emergency.

3. The high-pressure cleaning truck is based on the second-class original chassis. The upper part is a tank and is equipped with a high-pressure water pump. The high-pressure pump model: 3DS-8/16, GYB-8/16, pressure: 16 -19Mpa, flow rate: 8m3/h, hose length: 60m, coiling force: 1800 N, hose inner diameter: φ19 mm, joint type: 0, coiling speed: 0-25m/min, hole clamp angle: 15°, 25 ° Propulsion: ≥180 N


Trucks

Highlights Of Road Washing Truck

High Pressure Vacuum Pump

The high-pressure cleaning vehicle uses water as the working medium, and is composed of two parts: a booster pump and a power drive unit. Usually, the power drive pump completes a suction and discharge process for water, converting ordinary water into high-pressure and low-flow water. The water is then sent to the high-pressure pipeline so that it reaches the high-pressure nozzle with a certain amount of energy. 

High Pressure Vacuum Pump

The high-pressure cleaning vehicle uses water as the working medium, and is composed of two parts: a booster pump and a power drive unit. Usually, the power drive pump completes a suction and discharge process for water, converting ordinary water into high-pressure and low-flow water. The water is then sent to the high-pressure pipeline so that it reaches the high-pressure nozzle with a certain amount of energy. 

Rear High Pressure Spraying And Washing Reel Pipeline

There are three ways to control the water flow, by increasing or decreasing the inner diameter of the pump head, and by lengthening or shortening the stroke of the plunger. By increasing or decreasing the reciprocating speed of the plunger. Most high-pressure cleaners use a valve and pump head to form a system. The plunger pulls water into the inlet valve and pressurizes it through the outlet valve.

Rear High Pressure Spraying And Washing Reel Pipeline

There are three ways to control the water flow, by increasing or decreasing the inner diameter of the pump head, and by lengthening or shortening the stroke of the plunger. By increasing or decreasing the reciprocating speed of the plunger. Most high-pressure cleaners use a valve and pump head to form a system. The plunger pulls water into the inlet valve and pressurizes it through the outlet valve.

Front High Pressure Washing Parts For Road Washing

The valve controls the passage of water through the pump by preventing backflow. The valve consists of a spring and a bracket, and the pressure operation is done due to the different pressure difference on both sides of the valve. The valve opens when the pressure acting on the valve is greater than the capacity of the spring. On the opposite stroke, the water automatically squeezes the bracket against the valve seat, keeping the valve closed and preventing backflow.

Front High Pressure Washing Parts For Road Washing

The valve controls the passage of water through the pump by preventing backflow. The valve consists of a spring and a bracket, and the pressure operation is done due to the different pressure difference on both sides of the valve. The valve opens when the pressure acting on the valve is greater than the capacity of the spring. On the opposite stroke, the water automatically squeezes the bracket against the valve seat, keeping the valve closed and preventing backflow.

Get In Touch With Manten Now!
Get In Touch With Manten Now!
Add:
Rm 2704, Bldg 3, Wanjing International Garden, Qingnian Road, Jianghan District Wuhan, China
Rm 2704, Bldg 3, Wanjing International Garden, Qingnian Road, Jianghan District Wuhan, China