Negative Pressure Ambulance For Sale, Negative Pressure Ambulance System Manufacturer

Different Types Of Negative Pressure Ambulance

Ford Negative Pressure Hospital Patient Transit Ambulance View More

Iveco Negative Pressure Ambulance View More

Specification Of Negative Pressure Ambulance

SPECIFICATION
Truck Specification
Product Name		Transit Ambulance
Truck Manufacturer		MANTEN GROUP
Chassis Specification
Chassis brand		Dongfeng , Foton,JMC, FORD, IVECO, Sinotruk Howo, ISUZU, FAW ,NORTH BENZ, JAC, BEIJING,
Drive type		4X2, 4X4
Engine brand		Cummins, ISUZU ,ford, BENZ, TOYOTA, Wechai, Yuchai, Yunnei
Transmission brand		Fast ,ZF , Manual/ ATM
Tire brand		Tri-angle, Double Coin, Good year ,Michelin
Upper body specification
Transit type Ambulance equipment	1. Portable folding stretcher; 2. One medicine cabinet; 3. One fixed installation oxygen cylinder; 4. Two infusion hooks; 5. One sterilamp; 6.one waste bin; 7. Two single seats; 8. One set long chair(2 seat cushion, soft back and seat belt); 9.one set middle partition with sliding window; 10. One set full blue warning lamp alarm on the top of the front; 11. Two 12V light lamps; 12. One inverter; 13.one group 220V power socket; 14. Medical wear-resistant plastic leather floor; 15. Sign the ambulance cross; 16. air conditioning and heater.














Other equipment opton	Can be supplied as need

Negative Pressure Ambulance Manufacturers & Suppliers

1.Technology requirements:

The national Ministry of Health requires: 20 air changes per hour, negative pressure between -10Pa and -30Pa, filtration and separation rate up to 99.9%;The negative pressure ambulance is only a method of physical isolation. The bacteria and viruses are intercepted on the surface of the HEPA filter and cannot be killed. The medical cabin of ambulance should be sterilized for after using.

2. Operating Principle:

Using the principle of hydrodynamics design, a fixed air flow field area is formed in the medical cabin through the balancing air pressure of HEPA filter, and the air flows from the clean area to the infected area.The air pressure in the negative pressure chamber is between -10pA and -120pa, which minimizes the dead Angle and vortex flow of the air flow.

Trucks

Highlights Of Negative Pressure Transit Ambulance

The biggest difference between negative pressure ambulances and ordinary ambulances is that they can be "negative pressure isolation"; the air pressure inside the medical cabin is lower than the outside atmospheric pressure, and the air flow can only flow from the high pressure side outside the medical cabin to the low pressure side inside the medical cabin, so as to achieve The purpose of reducing pollution to the external environment; the air inside the medical cabin is discharged after harmless treatment, which can minimize the chance of cross-infection of medical staff when treating and transporting special diseases such as infectious diseases, and has a good effect on the source of infectious diseases. Control function; the car is also equipped with a full set of rescue equipment such as ventilator, defibrillator, ECG monitor, ultraviolet disinfection lamp, central oxygen supply interface, etc.

Negative Pressure Ambulance